Aa shown in the picture, the rod bearing shows standard Is the main standard as well? Thanks !
appears to be std as normally they are stamped with the size if they are oversized but might want to look the numbers up to be sure. but if i was to guess i would say it’s std size on the mains.
i’m no expert tho lol.
Thank you!! I also need the piston ring orientation if anyone has that. Thank you !!
i have no experience with the 207 but have rebuilt my 188 recently and i believe they are almost identical engines besides the obvious displacement size. r u looking for the ring locations as in top middle etc. or the stagger information on how to clock them to minimize the blow by. ? a manual would be ur best friend here. i can give u info from my 188 manual but i cannot guarantee it’s accurate for your 207. tinkerer may be able to help u with a downloadable manual that would have correct information. i purchased a manual on cd and them printed it out to have handy when needed for repairs.
Already looking for one lol. Thank you again!!
Go here ---> https://www.minnpar.com/partbooks/C...MANUAL/Case 580CK Series C Service Manual.pdf
I would measure the crankshaft. Case had different part numbers for OS bearing liners. A36450 may be .030 OS.