Starts and runs fine. drives fine but you cant move the joystick left and right therefore no loader functions. I can move them back and forward and will drive accordingly. Was trying to find part number also for lockout solenoid with emergency cable coming out of it. Thats what Im thinking it is. Thank you if anyone can help
is it a series 3 machine (pilot controls)?
Welcome to HEF @TDilts Most times it is always fuses or relay at fault. Check all these first, with particular attention to ones in diagram below. Check operator presence safety switches x 3 1) seat 2) lapbar 3) front door - if this is not an air cab, there is a plug with a small bridging wire in the wiring harness above your foot rests - make sure this is not damaged.