Hi My Case 435 suddenly stopped working, just wouldn't restart after running fine the previous day. The lapbar switch light was on so I metered that and found it wasnt completing the circuit so bypassed it to see if it resolved the problem. The light went off but the machine still won't turn over. I have a low/no transmission oil light flashing but I think that's due to the machine not running so I could be wrong. I'd appreciate any suggestions of what to check from here.
It could be one of the starter relays, number 11 and 15. I would swap them with another relay one at a time and see if one is defective. I assume the fuses have been checked.