case 445ct-3 aux hydro wont turn on

my case 445ct-3 skid steer aux hydros wont turn on ive spent the last 3 evenings after work testing wires and i am totally stumped any help would be great here is what i have done so far. bought a brand new aux roller switch with wiring harness built onto it. pulled fuse boxes out and tested all wires coming out of the bottom of them to make sure power is coming out. all good. i have tested every wire possible over and over again not finding anything causing why im not getting power to the switch. under the right joystick counsel is the little aux hydro control box and its not getting power coming to it so ive been trying to back track why not. cant figure anything out. i could go into some crazy details on what all ive done but i will make this a short read im really hoping someone can give me a idea on what to check here because im stumped. oh i also jumped power off another switch to the aux switch and it still wont work, wont send out signal down to the solinoids, if i put 12v to the signal wire i can get it down there so i know the wires are good. thank you very much in advance oh one more thing under the fuse box is 3 circuit breakers, one has red wires, its the main one if you pull the cap it will killl all power to the machine so its working. the other 2 have 2 purple wires going into them, no power going to either one of them but from testing most of the machine it seems purple wires are ground... thanks again