Does anyone know if a case boom cylinder swivel hydraulic fitting case part# D60947 is rebuildable? these fittings are $340 new and i cant see spending that kind of money on a hydraulic fitting! there is a snap ring holding the barrel part of the fitting on! so was wondering if they can be rebuilt by me or is there someplace that i can send to be rebuilt! i hope so cuz if not it will ruin my budget! if anyone has a used one for sale message me im interested! thx craig
Is this the fitting (googled the case part number)? I am familiar with swivels, just not your application. If this is it, it looks just some o-rings to replace. If the swivel is damaged, you could buy one the ones below?? https://www.discounthydraulichose.c...el Joints&utm_content=Hydraulic Swivel Joints
Rebuilt the swivels on my C, same part, just 2 o-rings with 2 backup rings..No leaks for 4 years...I would suggest ordering new parts from Case for best results. My first attempt with o-rings out of the shop kits leaked..Get new back-up rings too, if the old ones are brittle they may break during disassembly..O-rings #16202, b-up rings #D61902....Just make sure to lube the crap out of parts when reassembling..
and hone out barrel as there will be ridges in there
thx for the reply swetz, its the bottom one in that drawing! but when i go to that site and enter the case part number, no results! im not sure what case calls it other than a swivel joint, ill check again though. and mine is broken i need the second part in from the left on the bottom drawing! cant make out the number, im guessing its #2. actually thats not it either its very close though mine had a female flare on the number 2 part in that drawing! guess it wouldnt matter though i would just have to change fitting on the hose end! unless there is a reason the are like that! like i said in original post i have found the one under the case number but they want like almost 400 bucks for a new one! thats alot of money for a piece of metal that fits in the palm of your hand and allows you to connect hoses to your ram! Was hoping i could just get what i needed to fix it and save some money! maybe can find a used one thanks swetz for the info ill give that place a call tomorrow and see if they can help me!
thanks stinky64 so are individual parts avail. from case for these swivels i just need what i would call the barrel part of the fitting and the soft parts (o-rings ect.)? and thx for the rebuilding advice! so do i look to order from CASE IH? 0
thx to you as well 580bob the barrel is what i need to replace though! so much to replace on this old girl need to to cut costs wherever i can! i so appreciate what you all do here shareing your knowlege and experiance with diyers thank you, thank you, thank you! craig
i hope to pay it forward some day as well!
Here is a LINK to the breakdown of your swivels. If the part isn't shown in the list, CNH no longer sells it -- usually. Click on the image and it will enlarge.
Just a suggestion, but. If you cannot repair your OEM swivel, you could modify it with off the shelf fittings. It would require some welding tho. Take your fitting apart and weld a NPT fitting of whatever would be easiest from the list in the image below, onto the barrel of the old one. That would allow a 90° swivel to be screwed onto it then. Here is a LIN K .
thx tinkerer, thats a great idea! ill check with cnh for the barrel first and if that dosent pan out then i will be useing that idea! it dosent really matter what fitting i weld on i just would have to have a special hose made with what ever fitting to make the connection! sounds like you have done this yourself! goes to show there is always more than one way to skin a cat! as they say! thx again! craig
That Surplus Center link above doesn't work. Here is one that does. LINK