Skid steer intermittently blows 10 amp fuse for instrument cluster. Any idea where to look for cause
Had the exact same problem on a TV 380 blowing the instrument cluster fuse. Pulled out the relays below the seat. The accessory relay pins must have been loose, as I tightened up the receivers for the relays and end of problem. They are tiny pins and you can not feel if one pin is a little loose when pushing in the relay. It was blowing fuse every 2 minutes and has not in last year and half since I tightened them up. I used a 45 degree o-ring pick to tighted them up, slow patience job. Hope it is your problem. Simon C