Hola compañeros: I was thinking in removing injectors for maintenance purposes (machine has almost 9k hours). Do you guys have the procedure for doing this job? also putting valves in TDaC. What about injector sleeves? If I take injectors out, should I change them? If so, do I need a special tool? Thanks in advance for all your support and help
As it's electronic there's no maintenance you can really do on the injector, simply replace them. If you are replacing for hours run then you can get Reman injectors (20R-0055). Remember to replace the bolts in the clamp that holds the injector down in the head.
I was thinking in replacing the wearing mechanical parts