Heavy Equipment Forums Heavy Equipment Community

cylinder lift bushings

keith-50 · 2024-05-30 12:59

i need the part number for these bushings. here is the vin number 92v08493 79 cat-d7g

Replies6
  1. #1ahart2024-05-30 13:12

    #8 in image below, 4J-6167

  2. #2keith-502024-05-30 14:20

    thank you

  3. #3D5Dan2024-05-31 06:33

    Good looking machine! #8 is half the story (right?) …likely you’ll want/need the two bearing halves that wrap around #8. I replaced the ones on my D5 when rebuilding the rams. Also be ready to order some large washers/shims to take up the up/down slope (unless you’re catching the situation soon enough)

  4. #4ahart2024-05-31 11:10

    3J-2443

  5. #5chidog2024-06-02 16:32

    #8 looks like the hard steel sleeve shown in the first pic. You'd need 4, it shows 2.

  6. #6ahart2024-06-02 19:45

    If you’re doing both cylinders then that’s correct. The quantity showed is referring to per cylinder not per machine.