D 3 C Hystate: I reinstalled the blade lines wrong

Last winter I replaced the steel lines on the C frame of my D 3C XL series 3 dozer 4TS wrong. I used the dozer for the first time today The tilt function seems fine, but the blade angle works, but when pressure is applied to the blade by pushing dirt, it angles on it's own, seems to float. Can anybody supply me with a good picture of how the lines should be routed properly. All the functions were fine before I "fixed" it. Thanks in advance. The parts blow up is not clear enough, I cannot blow the picture up like the parts guys can.