D65E-6

1. #1Bls repair2019-02-08 20:14

   I would think you press it on till it goes to where it needs to go. Did you take any measurements before taking it apart?

2. #2Dave Neubert2019-02-08 20:39

   its a tapered spline like Cat so you press it on X amount of tons

3. #3John C.2019-02-08 21:06

   You could call a Komatsu dealer and ask the question. Since all that stuff is on computer now they should be able to look it up quick.

4. #4Bls repair2019-02-08 21:22

   I’ve found over the years that most dealerships don’t like giving out free technical information. They want to do it themselves

5. #5tctractors2019-02-09 02:21

   About 50 Ton will sort this, there is a measurement Standard also but as long as its pressed on around this tonnage it will be fine, on Komatsu kit we would always give the Sprocket a thump with a Hammer when under press loading to settle things in. tctractors.

6. #6Dave Neubert2019-02-09 07:54

   Thanks