Hi! Damn, just when I got the PS tranny working, after cleaning out every valve in the system... Now the steering quit working, to be correct, it quit working gradually? First when moving the machine around, it did quit steering on the left belt, and after shut down for a while and started up again, it could be the right belt that didn't work?? But now it won't turn at all! The turning brakes does work, but it feels like the clutches are not releasing for some reason? The machine is a pedal steer, like the track loaders, so the clutch and the brakes are both on one pedal for the right belt and one pedal for the left belt. If i push the pedal with extreme force (both feet), then it steers lightly. Any good suggestions were to start searching the problem? There has been some water in the oil, so maybe some valves are stuck again? Here is the treads for the transmission problem: HeavyEquipmentForums in this tread there is a lot of pictures of the machine: HeavyEquipmentForums Thanks for any advice! The ground is starting to melt over here, so i would need to get the beast running
No replies yet.