The hydraulics seem to be good and strong and loader works well. Its a 2015 model and has been deleted.
Welcome to HEF astro ! Need the complete machine serial number for accurate information. Is this the switch you are talking about?
I activate the remote by pushing top right button and light comes on dash and move manual lever to right of joystivk.
Serial number is 244kxpzb038064
The switch in the picture below? That is the pilot enable switch. If so, the indicator on the dash should be "OFF" when hydraulics are enabled. If the indicator is "ON", then your hydraulics are turned off. If it does not work with the indicator off, then check to see if you have voltage to the pilot enable solenoid, which should be on a valve block mounted on the left side behind the left rear tire either under the hood or accessed from under the engine. I can't recall which. There will be ana small round accumulator near it.
Well I sure do want to thank you for the info. It works like a champ when you push the right button! I bought this loader and it had some other problems also but have got them mostly handled now.
FYI astro for future reference , at the Deere Bookstore there is an option to download a free copy of the Operators manual . John Deere - Technical Information Bookstore Welcome to John Deere C&F Technical Information Bookstore. This site contains operating, maintenance, and service information. www.johndeeretechinfo.com