Hi, we have a 2019 245 GLC and would like to try a rock hammer. is there a way to adjust the flow rate and pressure , as well as make sure the return line is low and dumps back to tank? Can this be done, or is it be better to have a Tech come out ? Thanks.
Complete machine serial number please. It can be done through the monitor if you have the "F" serial number (FT4 engine). However, the flow rate adjustment in the monitor is an approximation. The machine still needs to be physically flow tested with a flow meter to make sure the proper flow is getting to the attachment. So, I would recommend having someone come out to set it up.
Thanks, that is good advise. Don’t have the serial # with me at the moment but I do know it starts with 1FF . It turns out looking thru the screen in work mode there isn’t an option for a hammer ….. so do have a Tech coming in a couple days.