Looking to get an opinion on the tolerance for the idler bearing in the track frame. I've got a lot of play right now, and that is likely a good reason for my tracks coming off more frequently. I suspect the best option would be to weld a plate of metal in the track frame vs. weld build up. The EX60-5 service manual does not include the tolerance for the bearing to track frame, that I can find... What is the overall opinion of a tolerance? Also, is that a common area to apply grease? On the sliding action of the idler bearing to track frame contact. On a side note, I've gotten really got at getting tracks back on! Thanks, Art
No replies yet.