Heavy Equipment Forums Heavy Equipment Community

Finding the right slope board for a John Deere 450G standard width

Farms7319824 · 2019-03-29 13:44

This (above) is a photo off of our old slope board. We would like to find a replacement but searching the numbers reveals nothing. We don't know where it came from. Here is the Identification Number of our Dozer. What is the cheapest and most efficient way of getting a slope board up and going on our 450G dozer? We would like to weigh several options so that we can decide how much to invest in a new / used slope board depending on the pros and cons of the different solutions. Any help would be appreciated. Thanks

Replies9
  1. #1Farms73198242019-03-29 13:56

    Here are additional photos

  2. #2Bls repair2019-03-29 17:54

    What’s wrong with old one?

  3. #3Farms73198242019-04-02 13:30

    @Bls repair The main pin and flanges are wore out really bad.

  4. #4Farms73198242019-04-02 13:42

    Here are more photos

  5. #5Bls repair2019-04-02 17:24

    New pin ,line bore?

  6. #6Wytruckwrench2019-04-02 19:03

    Yes, easy repair

  7. #7Welder Dave2019-04-05 00:23

    It's just steel. You could cut the ears off and weld new ones on too. A machine shop could make them up. Should be way cheaper than buying a whole new slope board.

  8. #8Bls repair2019-04-05 14:50

    If you buy used probably in similar shape.

  9. #9Farms73198242019-04-05 15:59

    We got a repair going that is almost done... thanks for the help on this page, it is much appreciated. see photos