Whats everyone running and getting for fuel. I run a 140M AWD and average 5.6 and 6 per hour
I run a 2007 Cat 140H and I get anywhere from 3 to 3.5 gallons per hour blading roads. Plowing snow it's around 4 to 5 gph.
Forgot to say that when blading roads I blade in 5th gear at 1300 rpm
My older deere 770bh would run about 5.5/hr blading gravel roads and about 6 blading dirt roads. 6.5-7 plowing snow. My 2006 deere 870 d runs between 4-5 blading gravel roads in 5th gear @ 1300 rpm. If I run in 4th gear @ 1900 it uses 5.5 to 6. There can be alot of differences depending on how hard u cut, which edges u use, hills or flat ground,but it sure helps to be able to shift up and throttle down to save fuel.