Hi Folks, Me again. This time I have a Gehl 4835 that is not powering the left wheels. Starts and runs fine, right wheels work fine, lift and tilt work fine. When I block it up, the left wheels turn backwards slooooowwwlllyyy, no matter what I do with the stick, but not enough juice there to move the machine when it's on its wheels. This is a tandem pump. The front pump controls the left wheels, so that's the pump I'm looking at. I'm thinking it's a pressure setting that needs to be checked, but I have no idea where to check it. I would expect to see something like 3500 - 4000 psi on a test port somewhere, but I don't see one. Any suggestions? Thanks!
No replies yet.