How many shots of grease to bar and how often?
What machine..?
Assume it's a high drive. When assembled pump grease until the rubber seal starts to expand then stop. Later Bob
Nige, It's a cat d6n xl.
Greasing intervals for the equalizer bar are every 250 operating hours or monthly, whichever comes first. As Bob alluded to above the seals on the ends pins of the equalizer bar are not designed to leak, so you have to be very careful how you grease them. Under NO circumstances use a power greaser, only use a hand pump. The seals will swell slightly as the space behind them fills with grease. As soon as you see this, stop. Also inspect the seals carefully for any signs of grease leakage while you are greasing the pins. If grease can get out dirt can get in and the spherical bearings will not last long after that happens. Any leaking or damaged seals should be replaced at the earliest opportunity.