Heavy Equipment Forums Heavy Equipment Community

have a problem with t200 bobcat year 2003

dozr ยท 2014-03-29 19:39

problem is relay gets hot tilt light goes out hyd locks down shut machine down goes back to work just never know how long it will work geting shoter was thinking some one might help thank you for your help

Replies7
  1. #1dozr2014-03-29 19:43

    thank you for replys

  2. #2dozr2014-03-30 09:53

    i was thinging could this be the hyd lock coil trying to go . and need help as to where it is on machine, have checked for bad wires but noting jumped out as to prolbem. changed hyd filter

  3. #3crewchief8882014-03-30 10:14

    what code is it throwing? :drinkup

  4. #4dozr2014-03-30 12:51

    not sure how to see codes . in book for codes for tilt light that is going out on left side of panel should be 17 -517-617-7 hyd lock valve thanks for your help

  5. #5dozr2014-03-30 13:11

    missed in codes 17-5 17-6 17-07

  6. #6crewchief8882014-03-30 13:25

    hyd lock valve, ie: BICS located on the side of the control valve, between all the tubelines and fittings. if it's intermittent, the coil is going out. replace it before it stops working :drinkup

  7. #7dozr2014-03-30 13:37

    thanks looked at it looks discoled on one side first time with bobcat