Hello to any one that can help me, i need to remove my pony motor on my dozer and replace it with a new starter on 24 volt system, my problem is i have removed all the bolts i can find. But motor will not move and have all the exhaust removed, the coolant lines off. but it will not move. The other part to this is it has a blade monut on the inside, so i cant drop belly pan to get from it on the bottom. Dos any one have a old service manuals or pic on how to remove and install new starter. Thank You
There are 5 bolts under starting motor to block you should be able to get from top,starter drive will be rusted in flywheel housing.Starter weights about 500# be careful.Get a set of books for your engine or find another engine for parts. good luck Bob
Here is what the Service Manual says..