hello i have some problems with a1996 serial 6ym cat 315 i just installed a new engine and repack the main hyd pump i didnt see anything wrong with the pump, but machine when i start working engine dies, when i reléase the controls gain power again, i checked my pump pressure on both pumps that make the mainpump and it is 2750 psi do you know if that pressure is good or if it could be anything else. Or can you help me telling me the pressure that i need on both pums thanks mauricio
Is the power shift solenoid working correctly? I had a similar problem on my '02 315 CL. Machine would run fine until you put the engine under a load with any hydraulic function. I found a bad duetsch pin in the harness that plugs into the power shift solenoid.