i have a 753c bobcat and the instrument panel is very hard to read i bought it used and it had motor problems got it running and the panel is dull not bright like others i have ran could there be a ground problem or is the panel going bad?
i assume you are talking about the RH BOSS display panel. ive seen a few that are very dim, almost unreadable, especially in bright sunlight. i doubt you have a ground problem, if the BICS and park brake are working properly :drinkup
Did u ever find out the problem on my screen hit run /enter and goes bank may be u can help
what model machine? i assume you have the deluxe panel? :drinkup
Yes and sometimes it looks fuzzy can u help me ?
Yes bobcat s220
remove your battery cables,(even if they look good), clean the cable end and battery post, along with the small grounds on top of the neg cable, also remove & clean the neg cable(s) where it attaches to the block. check your fuses and relays for corrosion, clean if needed. this may solve the problem, if not, raise the cab, check (clean) the ground between the cab and frame. :drinkup
All try that thanks 4 answering back
I hit the run and still shuts down after 5 to 7 times I get a screen some times the screen will come back in spanish and fussy wath do u think?
you may have a panel thats going bad as for it being in spanish, to change it back, you need to get into owner utilities on the panel and select the language of your choice. :drinkup