Is this supposed to look like this?

1. #1willie592010-04-06 21:13

   Holy Cat Batman! That looks radical! Nice pic bro.

2. #2tonka2010-04-06 21:36

   Um is it me or is the winch cable out on that thing?

3. #3kleener2010-04-06 21:56

   Ouch

4. #4AustinPSD2010-04-06 22:02

   That's not gonna buff out...

5. #5FSERVICE2010-04-07 00:00

   that had to hurt

6. #6Panhandler Bob2010-04-07 07:08

   How to convert hi-track to oval track :drinkup Bob aka ZZ

7. #7plantman.uk2010-04-07 15:39

   ooops howd that appen?

8. #8qball2010-04-07 17:20

   watcher gonna need is one of dem dere porta-powers and some 7018 rod.

9. #9AmerIndependent2010-04-07 18:54

   Wow! What's the story behind that?

10. #10EGS2010-04-07 19:47

    I would say someone was banging her around on the rock little to hard.:Banghead

11. #11John C.2010-04-07 19:51

    Don't think I've ever seen such a complete failure as that. The front idler is obvious but it also looks like the dead axle is broken too. Supervisor to owner: maybe we should pay a little better wages to the next operator.

12. #12cps2010-04-07 19:53

    Seen a few D6's crack there, we always checked them and welded them if they needed to be when we we're do undercarriages! Never seen one go that far though... ouch!!!

13. #13tomgpasterik2010-04-09 09:14

    what happened How hard were you running that?

14. #14Vantage_TeS2010-04-09 19:06

    Apparently not as hard as the rock

15. #15Dirtdozer2010-04-19 20:53

    I hate ROCK. Its too expensive. Looks like you might have a patent there.

16. #16oversize2010-04-20 06:30

    Never has a truer word been spoken

17. #17tippatone2010-04-20 13:02

    What the HELL happened?

18. #18Panmanm4372010-04-20 23:26

    Are the track pins bushing worn out? Usually on early d6h's track chains get long measurment between ilder & roller frame is to much. This causes them to break at a machined out spot on the inside. The later d6h's where not machined out as much & they didn't have as much problems. Mike, panman

19. #19RDG2010-04-21 01:05

    That machine looks like it has Cats quad link or tri link track system on it, has the outer link assembly on the plates to give them more strength. Guess thats a good reason why you shouldnt use a swampy in rocky conditions.

20. #20MOJOWY2012-05-30 22:48

    Help with Dozer Can someone help me out i have a 1800ft driveway to build need help with size that will work now what i am looking at is a 650j JD cheapest frt and rent or 1650 case lots more money and frt will the 650j do the job just slower? dont care if takes 2 days with one and 4 days with other Going start thurs sorry about short time

21. #21Ross2012-05-31 02:18

    Ah that's nothing really. Justs needs a new bullet. Ask the fort cracker boys about Cat dozer undercarriage pain!

22. #22rk668ak2012-06-03 14:36

    Thats going to take a while to repair.