I’m working on a jlg scissor lift, the model is 2632 es. And I don’t have the year or serial number yet, I’m go to get that tomorrow, when I go back out to it. But the platform won’t raise and it won’t drive or steer, and it has two codes, which are e5002 and a 321 code, I cleaned all the battery connections and replaced the corroded cable ends,any suggestions on what to check would be very appreciated Thanks
Sounds like a safety interlock is holding it out. I had one were the cable on the platform was pinched
I ended up replacing the line contactor relay on it and everything started working again.