Line blew on right side. This is the side where line is on bottom when you take of cover. Fitting was frozen so had to cut line and remove bigger fitting going into drive motor. A rod came out of motor and also a smaller rod and a spring. Looking everywhere online for schematic so i make sure i reinstall correctly. Any help is appreciated
If there is a tag on the motor it will have all the details, manufacturer, model #,serial #. This information is vital in your search as the motor is most likely is supplied to Kubota from elsewhere.
Thanks, Could not find anything on motor. Trying to find service manual so i can see how the parts that were on top of hydraulic fitting go back in.
I have looked at some photos and from looking a the outside of the planetary hub it looks like a Nabtesco/ Hy Dash manufactured but what size or model I can't determine. There are businesses who specialise in repairing them and may give you the information you want. Your Kubota dealer won't be any help as they only replace them and not repair.
thanks. I found a diagram and it looks like i got it back in correct. It is the spring and 2 plungers for 2 speed travel that were giving me fits