d5h 3md442 sn stright blade power shift, michine history had 3057 hours when bought trans had aluminum,piston in cluch packs quit sealing put steal back at about 5000 hours lucked out cat had just had same problem with on they built so that went well with there help it would miss shift in about 2 hours running. next was resoler in hyd valve on lift valve ,wrist pin on number four at about 10,000 built motor, this time it had brake dragging left side had cat built break and steering valve went though breaks and steering clutch replaced metal dist in breaks only thing wore, cat goofed on valve would not release they checked and fixed it went in to tran again at about 11000 hrs the break thing was last fall at 14000 hrs now still heating in about 2 hrs running going to pull rad and clean trans cooler , if that dont work going to pull torque, just because never have had in my hand, no metal in filter never had trans heat with out metal about to run out of things to try, pump presser good pulls good just heat. any thoughts or anything i am missing would like to hear. thanks for the help.
No replies yet.