Have a 2012 sk210LC put a thumb on It now would like to know how to adjust the flow Appreciate any help
Good day Many machines have the possibility to adjust the pump flow by adjustments through the machine display when using the option lines (Mainly intended for hammers). Take a read of the operators manual or try to borrow a repair manual. kind regards Uffex
Off the top of my head but this depends on model post a picture of your dash and full machine model (-6e? - 8 etc) to confirm but you can try this If you put the machine into the aux/breaker mode, the flow rate should appear on the screen then press and hold the screen change button(when you press screen change button the flow rate will disappear keep button pressed for 6-8 seconds and flow rate should reappear then release screen change button. Mode button increases flow, buzzer stop decreases flow screen change button saves setting