While running my skidsteer it will stop and the brake light will come on. The engine runs but it will not move. After shaking the safety belt i turn off the brake light and it runs again. I have replaced the safety belt and feel it is a safety switch issue. Where do I start?
You replaced the seat belt switch? If that switch is good have you checked the seat switches? Power goes through them before the seat belt switch.
I replaced the entire seat belt assembly, And checked seat switch. Now it won't start. light beside brake is flashing orange instead of red and the seatbelt light flashes like seatbelt is not connected.
Does it start in service position?