Heavy Equipment Forums Heavy Equipment Community

Pin Bushings

Rick Rowlands ยท 2008-08-14 08:44

Anyone know where I can get pin bushings? My White Oliver has bushings pressed in the stick which a pin slides through for a hydraulic cylinder. One of those bushings is missing and now the pin has 1/4" of clearance to bang around in whenever the hoe is raised or lowered. Its 1 1/2" ID, 1 13/16" OD and 1 1/2" wide. Just trying to perhaps find if someone makes those before I have a machine shop do it. Thanks

Replies6
  1. #1Woodboatdave2008-08-14 12:42

    try McMaster-Carr.com... they have a good selecton of bushing stock

  2. #2Woodboatdave2008-08-14 12:44

    oh yeh.. forgot MSC supply also ( msc.com) both of these companies will sell over the internet and take credit cards. Dave

  3. #3OCR2008-08-14 13:21

    Try this one too Rick, Look under Products. http://www.skf.com/portal/skf/home?lang=en&site=COM OCR

  4. #4Rick Rowlands2008-08-15 22:39

    McMaster had one that was close but too small in the OD. I'm having someone make me one to the right dimensions. Thanks

  5. #5Minkus822008-08-20 08:18

    i have had some luck with finding used ones on ebay. not very often but occasionally you can come across stuff and its usually pretty reasonable on price

  6. #6buckeye backhoe2008-08-21 22:37

    Rick, call a place down by Millersburg called , Paint Valley Equipment. They fixed me up with pins and bushings for my old Ford for 25% of what Ford wanted.