Hi Sorry to hi-jack your thread to validate account. I have a 1997 Daewoo DH50 excavator with starting problem. Existing key turns to left for heaters plugs and then to right for what i believe to be ignition /auxilaires and then right again to start. Turning to right once appears to bring in a large relay at the front of the machine which completes the starter motor power cable circuit turning further right fails to operate the starter solenoid. Jumping the starter solenoid contacts operates the starter motor and cranks the engine. The cables on the starter motor solenoid are yellow and white about 2.5mm diam over the insulation. There are no similar coloured or sized cables connected to the ignition/starter switch. Does anyone know is there another device between the starter switch and the starter motor solenoid and if so what it is and where i might find it? Does anyone have similiar experience or can offer advice re a solution? A wiring daigram would be great help if anyone has one or can tell me where i might locate one.
No replies yet.