850J, Ser. 169801. I finally found out why I have to top off my radiator periodically. No overheat issues, just damn annoying. I've got a small fluid leak in the fins about 5" up from the bottom of the radiator and I need to have it tested/repaired. Can anyone tell me if I can just disconnect the radiator in the machine or will I need to lift out the entire cooling package (intercooler, hydrostat oil cooler, and engine radiator) and then disassemble the cooling package to get the radiator to the shop. Thanks for reading.
I did one years ago. I only took the rad out. The lower mount bolts were a stretch but it’s possible
Thanks, I'll give pulling just the radiator a try.