Heavy Equipment Forums Heavy Equipment Community

Safety start switch case 580 c

Doug Brown ยท 2021-04-01 17:19

Is there a safety start switch on the 580c. I have power coming from the push button but it is not making it to the starter. If so where is it located. Thanks

Replies3
  1. #1alrman2021-04-01 18:05

    If it has a power shuttle, you will find the neutral start switch near where the oil filler/dipstick pipe enters the shuttle housing.

  2. #2Doug Brown2021-04-01 18:13

    It does thanks I'll look for it tomorrow

  3. #3stinky642021-04-02 01:20

    Look on the right side of the shuttle on the opposite end of the cutout solenoid, it's the one with the little button like slide on connectors..In a pinch the switch can be bypassed, but should be replaced so nobody gets run over...