t190 track lock problem won’t let machine mov

1. #1willie592018-05-27 21:04

   What code(s) are you getting. Parking brake solenoid and valve is located under the cab, you have to tilt the cab up, it's typically located just forward of the pumps. Easiest way for me to tell you how to find it is to start where the big hoses go through the frame on either side to the drive motors. You'll have 2 large hoses going to a drive motor and at least 2 small diameter hoses, one is the case drain line and the other is the parking brake line, follow those two lines backward from the drive motors until you find the one that goes to a valve body with a solenoid cartridge, that's the parking brake valve.

2. #2joecat2018-05-29 10:13

   Short to ground track solenoid

3. #3joecat2018-05-29 10:18

   Jus fired up the machine again moved for about 2 feet then stopped the parking indicator light on the bics won't light up it blinks and then on the screen it says short to ground

4. #4joecat2018-05-29 10:41

   Are they steel lines? Just tilted the cab

5. #5joecat2018-05-29 10:46

   I take it that it's this solenoid I pushed the wires in and it moves

6. #6joecat2018-05-29 13:05

   Is this the solenoid that valve body says hydroforce on it

7. #7Tones2018-05-29 17:31

   I have had problems with those solenoids as well. The wire breaks so close to the outside you can't repair them so they have to be replaced.