Was using the machine heard a loud pop coming from one of the final drive. Bought a new one installed it and started the machine and it don’t move. But the boom and bucket work fine any help please
Hi Are both travel motors not working or just one side?. If just one side then you may have an issue with the motor you have installed or you are not getting any flow to that final drive motor. Take a 20 liter container and remove the 2 drive hoses off the travel motor that is not working. Place the hoses into the container and operate the travel lever for that motor for 30 seconds. Measure the amount of oil. Do the same test again for the side that is operating ok. Now compare the readings, are the measured amounts equal or similar?. Kind regards
thank you for the information found out the issue when lowering the cab on the excavator the customer ended up snipping the safety sensor wire for the hydraulic function on the right side of the operators seat Thank you