Went through a couple of operations. My TBO35 has been sitting for a while. I went back out charge the battery cranked it up. Everything seemed fine. Got in the seat raise the blade, pushed down the lockout lever at my left arm. Tried to raise the boom and nothing happened. Tried to make the stick go out or in, nothing happened. I checked the fuse on the control panel. Fuse was good. Checked the limit switch under the control handle and it works on the meter. Put it back and try it again. Nothing happened. My thoughts are that the next thing should be checked. Should be the pilot control valve solenoid to see if it is getting power from the battery. Any thoughts? Thanks in advance.
No replies yet.