Heavy Equipment Forums Heavy Equipment Community

TC62H Gauge Problem

Grandsportx70 ยท 2025-04-05 15:06

I Have a John Deere Year 2000 TC62H and am having trouble with Monitor. Gauges sweep when key is turned on but nothing works while running

Replies3
  1. #1reganj2025-04-05 20:28

    I suggest you post a serial number so the smart guys can guide you

  2. #2Grandsportx702025-04-07 07:58

    Here is the Serial number on the Machine. DWTC62H580530 . The dash Module part number is AT170314 We have cleaned all the grounds we could find. Removed and cleaned Canon plug connectors and checked sensors on the transmission and connections on TCU.

  3. #3Grandsportx702025-06-10 08:16

    Had Machine at Dealer and they couldn't fix the problem. Replaced Monitor and CCU. Cleaned main power wires and removed and cleaned all the grounds we could find. Have no gauges including RPM and pressure gauges. If we disconnect CCU the machine still starts and runs.