Heavy Equipment Forums Heavy Equipment Community

Transmission oil level

lynio ยท 2025-03-01 18:05

How to properly check the transmission oil level on a 310g backhoe? My park brake keeps on engaging while the machine is in motion. On the dip stick should the transmission oil be in the middle of the double arrow on the dip stick while the machine engine is running?

Replies8
  1. #18V712025-03-01 18:24

    Check to see if the rear axle is over full if so the park brake seals may be leaking transmission oil into axle. Very common issue with that machine

  2. #28V712025-03-01 18:25

    Check while running

  3. #3lynio2025-03-01 19:50

    Ok.. where should the oil level be on the dip stick ... the stick has two marks at the bottom and two marks at the top and a double ended arrow in the middle should the oil be in at the top or in the middle of the marks located on the dip stick?

  4. #48V712025-03-02 09:44

    Between the arrows. Can verify with refill capacity

  5. #58V712025-03-02 09:48

    Do you have power shift or synchro shift transmission. Speed selector on the FNR or on the floor

  6. #6lynio2025-03-03 00:09

    Thank you for that info....Power shift on the floor

  7. #7Diesel Dave2025-03-03 08:12

    @lynio ,to help you familiarize with the machine. At the Deere Bookstore you have the option to download a free copy of the Operators manual. There are 2 versions based on machine serial # . https://www.johndeeretechinfo.com/search?p0=model&p0_v=310G&pattr=p0 .

  8. #8lynio2025-03-03 20:53

    Thank you @Diesel Dave