I have been running our 300 and when im diging it flashes a code e 0 5 eny idea what it is?:beatsme
Brandt, First thing to check: Does the auto-decel switch on the dash work properly? The E05 code is an electronic fault code, and after determining the "location" of the problem, you will have to dig deeper into the monitor fault codes to determine exactly what the problem is. Check the auto decel switch first, then lets take it from there. Tony
Check out this site in the Komatsu forum under Dash 6 codes. I think I put all the Komatsu excavator codes in there. http://www.constructioncentric.com/forum/YaBB.pl If you can't get in let me know. Good Luck!