My 863F with AHC controls had a leaking tilt spool which filled up the actuator with oil. the actuator started to fail gradually, it worked for shorter periods of time until not at all. I just resealed both control valve spools and installed a new tilt actuator (although after removing the oil and cleaning the brushes in the failed actuator I'm thinking it should work too..) Before doing the work, the valve lock light on the BICS module would light up until I would attempt to move the tilt control(lift still worked). maybe I'm forgetting to do something or maybe I reconnected something incorrectly but the light will not come on at all now. is there any calibration required on an F series? any obvious things to check?
No replies yet.