We replaced the dump cable on our truck. Somehow we bumped the circuit board and blew the 25amp fuse that feeds the fuse\relay panel. Replaced the fuse now the truck won’t go in gear. I can’t see any other fuses blown. Any help would be greatly appreciate.
On the RF bulkhead there should be strip fuses in a black plastic housing, below the surge tank if I remember correctly. See if any are failed. Do you have power at the PCB fuses?
We blew the 25amp strip fuse circled.
If you have a meter, check all the fuses in the main fuse block in the cab on rh side under the shift lever.