I have hydraulic spewing out of the hoses coming from the hydraulic tank.The hoses seem in good condition and they are double clamped top and bottom and are tight.Is it possible I have a high pressure problem in the tank that is forcing the hydraulic past the clamps?
crack the cap on the tank and see how much pressure you have in there. Maybe tap a 200 lb gauge in there and see what it reads.
Those are double clamped, but not properly. The clamps should be 180° apart. That way the hose distortion is spread evenly. You're absolutely sure the hose is not suffering dry-rot? When were your filters last serviced?
Honestly it looksto me like that hose has dry rot cracks in it. Id start by replacing it...
If the hose is good, replace the cheap hose clamps with band clamps that tighten with a bolt.