First time crane owner of YCC LTM 1400 and need reeving help as the instructions are vague for a first timer. Specifically, on the initial thread routing for the 11 pulley hook/block. My questions are when looking at the crane from the front: 1. At the top 3 pulleys do you use the far left or far right pulley? 2. Then does it pass over or under the silver bar at middle set of 11 pulleys? 3. If over, at the hook does the initial routing wrap around the pulley from front to back or back to front? 4. If under, what middle pulley does it use for routing far left, far right or other? Thanks in advance.
No replies yet.