Heavy Equipment Forums Heavy Equipment Community

zaxis 120 monitor not working

town hoe ยท 2021-02-28 14:31

Hi i have a 2004 zaxis 120 everything works fine except the monitor has quit working just wondering if this has happened to anyone else. I have checked for loose wires and made sure the plugs are in tight. It was working fine, then it went off one day but came back on again. Now it just does not turn on at all no gages, no hour meter nothing at all lights up. i am two hrs away from the hitachi dealer so trouble shooting could get expensive. Any help would be greatly appreciated. Thanks mark

Replies8
  1. #1mg23612021-03-01 04:30

    Fuses OK? Those in the know will need the dash number.

  2. #2town hoe2021-03-01 10:16

    HI mg2361 yes it is a zaxis 120 -1 i have checked all the fuses that i can find thanks mark

  3. #3mg23612021-03-01 12:02

    I don't have any -1 information, but hopefully someone out there does.

  4. #4town hoe2021-03-01 12:10

    thanks mg2361 i hope i can fix it. I just checked the price of a new monitor 1700 cdn. but that wont help if it is not the problem.

  5. #5town hoe2021-03-03 10:01

    Hello everyone i have solved the problem. It was the monitor i replaced it with a used one and it is working fine now. thanks

  6. #6Quint2021-03-03 14:46

    Did you keep the old one? If so any plan on taking it apart to see if its a simple fix or not gonna bother, just curious.

  7. #7town hoe2021-03-03 18:48

    Hi Quint i am just going to throw it away because it is grey market and has jap writing on it

  8. #8Quint2021-03-03 22:50

    Understandable, if it was anything close to my 30U would pay to have ya send it to the San Juans but I dont think that is going to be anything close.